Como usar as mangas de silicone para biberões de vidro de gargalo largo Dr. Brown's

Quick answer

Slide the sleeve onto a clean, dry bottle after wetting the inside of the sleeve and the outside of the bottle. Ensure the sleeve is fully seated and the see-through panel is aligned for visibility.

Step-by-step: Installing your Dr. Brown's silicone sleeve

1. Wet the inside of the sleeve and the outside of the bottle: Run warm water over the inside of the silicone sleeve and the outside of the clean glass bottle. This reduces friction so the sleeve slides on smoothly without tearing. If the sleeve feels stuck, add more water — never force it over dry glass.
2. Slide the sleeve onto the bottle from the bottom: Hold the bottle upright and push the sleeve upward from the base. Work it evenly around the bottle, stopping when the top edge of the sleeve sits just below the neck ring. Check that the see-through panel faces forward so you can see the milk level.
3. Adjust and smooth out any wrinkles: Gently roll or pinch the sleeve to remove air pockets and ensure full contact with the glass. The sleeve should feel snug but not overly tight. A wrinkled sleeve can trap moisture; smooth it before first use.
4. Remove and clean the sleeve regularly: Pull the sleeve off after each use and wash it with warm soapy water or place it on the top rack of the dishwasher. Let it air dry completely before reattaching. Don't skip drying — trapped moisture between the sleeve and bottle can lead to mold or mildew.

Product details

• Dr. Brown's Natural Flow® Options+™ Wide-Neck Glass Bottle Silicone Sleeves: Removable 100% silicone sleeves are grippy, making glass bottles easy to hold. Sleeves help protect Dr. Brown’s glass bottles against breakage while in use, while sterilizing, or while in the dishwasher. This means you can use the sleeve from prep to feeding to cleaning, reducing the chance of a shattered bottle at any stage.